Technologist reading production reports on tablet computer in factory.

Available with:

  • Foundation Year

Accreditations

IChemE Internationally Accredited Degree

Course Summary

Chemical engineers develop innovative processes to turn raw materials into useful products such as fuels, plastics, foods and medicines. On this course you will learn the key set of chemical engineering principles and understand how to use them for a huge range of applications, such as eliminating harmful emissions of greenhouse gases. 

Our BEng and MEng degrees are fully accredited by the IChemE, and have been designed in consultation with major recruiters of chemical engineering graduates. We have a strong, supportive culture underpinned by interactive, problem-based learning and research-active faculty. In addition, every student has a personal academic tutor, who will support the student in both the academic and practical aspects of university life. 

Preparing students for professional success is a key part of our mission. At Chester, all chemical engineering students complete work placements as an integral part of their degree. Opportunities to develop professional skills are embedded throughout the degree programmes and good staff-to-student ratios help students build confidence, for example, in giving presentations and participating in class. 

Why you'll Love it


What You'llStudy

Will support your development of the skills needed for a degree, including exam technique, technical report writing and presentation, mathematical concepts, and application of knowledge to differing contexts.

Module content:

  • Reading and writing critically.
  • Constructing and evaluating an argument.
  • Note-taking techniques for reading and listening.
  • Understanding plagiarism and academic integrity.
  • Introduction to reflective practice.
  • Preparing for, and delivering, powerpoint presentations.
  • Referencing and citation.
  • Summarising and paraphrasing written sources.
  • Literature searching.
  • Report writing.
  • The culture and expectations of higher education.
  • The assessment process including the role of assessment criteria and feedback.
  • The nature of research journal publishing.

Whilst much of the content above is generic, students will be encouraged to situate skills within the context of the undergraduate discipline they are entering, which leads to some variation in emphasis for certain skills.


Module aims:

1.To raise awareness of the range of study skills required for successful higher education studies, including the process of academic writing, reading strategies, seminar skills, organisation of time and materials, planning for and meeting deadlines, understanding and responding to feedback.

2. To introduce students to concepts such as plagiarism, academic integrity and appropriate use of artificial intelligence tools.

3. To facilitate an effective transition into higher education by exploring, and providing guidance in, the key elements of successful undergraduate studentship including students' understanding of taking responsibility for their own learning.

4. To teach students how to undertake a literature, visual or data review for their discipline and be able to differentiate between a valid, reliable source and an unsubstantiated or irrelevant source.  

Module content:

  • Research and planning skills.
  • Becoming familiar with topics that comprise their undergraduate degree subject.
  • Developing a knowledge base for a discipline of study.
  • Identifying areas of interest.
  • Application and development of critical analytical skills.
  • Development of self-directed study.
  • Use of learning resources.

Module aims:

1. To develop students' skills in planning and writing an essay.

2. To familiarise students with the process of tutor supervision for a written piece of work.

3. To give students an opportunity to focus on a topic within their undergraduate degree subject.

4. To write a piece of work that allows the student to broaden and deepen knowledge on a topic of their choice.

5. To prepare and deliver an academic poster presentation outlining the student's research topic.

Module content:

 

  • Atomic structure and the use of atomic and mass numbers to describe elements and isotopes
  • Electronic configurations and energy levels
  • Trends in the Periodic Table
  • Describing chemical reactions using formulae, balanced equations and moles
  • Bonding and forces – ionic, metallic, covalent and intermolecular
  • Reaction types – redox and acid-base reactions
  • Organic chemistry – functional groups and some key reactions; aromatic compounds and isomers
  • Energy changes in chemical reactions
  • Equilibria and constants
  • Electrochemical cells
  • Reaction kinetics
  • Rate equations and orders of reaction

Module aims:

 

1. To provide a thorough grounding in inorganic chemistry

2. To introduce key ideas in organic chemistry

3. To examine the physical factors that influence inorganic and organic reactions at an industrial level

Module content:

  • Algebraic skills
  • Solving equations
  • Co-ordinating geometry, including points, lines and areas
  • Differentiation
  • Integration
  • Matrices
  • Sequences and series

 


Module aims:

1. To further develop skill in mathematical application, method and technique.

2. To prepare students with the mathematical skills required for undergraduate degrees in engineering and physical and mathematical sciences. 

Module content:

  • Background study and basic definitions
  • Particles I: The structure and properties of atoms
  • Particles II: The sub-atomic regime
  • Introduction to quantum phenomena e.g. the photo-electric effect
  • Radioactivity
  • Nuclear processes
  • Electricity and electric circuits
  • Electric fields and forces
  • Magnetic fields and forces
  • Waves I: Mathematical descriptions
  • Waves II: Electromagnetic waves
  • Waves III: Properties of optics including reflection, refraction and diffraction
  • Introduction to thermodynamics
  • The laws of gases

Module aims:

1. To provide the students with the knowledge and understanding of the basic principles of particle physics, electricity, magnetism, waves, thermodynamics, and gravitation in preparation for undergraduate study.

2. To develop students’ awareness of the applications of physics in real situations.

3. To develop modelling and problem solving skills as well as communicate effectively using scientific concepts and language.  

 

 

Module content:

  • Working with units and physical quantities
  • Trigonometry and basic mathematical concepts
  • Coordinates and vectors
  • Particle dynamics
  • Forces and Newton's laws of motion
  • Moments of forces
  • Centres of gravity and mass
  • Linear and projectile motion
  • Circular motion
  • Oscillations and simple harmonic motion
  • Work, Energy and Power
  • Impulse & Momentum
  • Newtonian theory of gravity

Module aims:

 

1. To introduce the relationships between forces, one and two dimensional types of motion, energy and momentum.

2. To develop students' understanding of mathematical modelling of force combinations, non-linear motion and non-uniform motion related to varying forces.

3. To adequately prepare students for the next levels of study on their undergraduate degree with reference to problem solving technique as a key feature of exams.

 

You will study the essential chemistry, thermodynamics, fluid mechanics, biotechnology, materials processing and mathematical methods needed to understand modern chemical engineering.

Module content:

Review of prokaryotic and eukaryotic cells

Animal and plant cell ultrastructure and function

SI units of measurement; moles and molarity

Basic organic chemistry

pH and buffer systems

Structure and function of major biomolecules

Energy and biochemical processes

Action and properties of enzymes and coenzymes

Enzyme kinetics

Metabolism and metabolic pathways

Appropriate practical techniques; data analysis.


Module aims:

This module aims to provide students with an understanding of those aspects of cell biology and biochemistry that underpin the subsequent study of behavioural, nutritional and life sciences. Further, the module also aims to develop the process skills involved in investigative methods.

Module content:

University Skills

  • Working in teams: roles and responsibilities, record-keeping, survival skills, peer assessment
  • Making and monitoring a plan
  • Report writing: technical and laboratory reports, structure, content, grammar, the importance of accurate referencing and avoidance of plagiarism
  • Effectively search a range of different information sources and critically evaluate for appropriateness for academic use. Understand the nature of research journal publishing and the importance of primary research findings to study of scientific/technology disciplines.

Professional Skills

  • Introduction to professional ethics
  • The role and responsibilities of the scientist and the engineer in society and in protecting the environment
  • The inter-disciplinary nature of engineering.
  • CV and cover letter writing

The Design Process

  • The design process: introduction to the key stages of research, concept, feasibility, requirements, preliminary design, detail design, production.

Module aims:

The purpose of this module is to ease the transition from school to university by setting the multi-disciplinary context and expectations of degree courses and careers in engineering and natural sciences.  Students will be introduced to design, which is the integrating theme that runs throughout engineering degrees, and has great relevance to scientists.

Students will be introduced to the transferable study skills that they will develop throughout their university career.  In particular, they will develop their communication skills, team-working skills, and they will understand the need to take responsibility for their own learning.

Module content:

Mathematics

  • Introductory review: arithmetic, algebra, notation
  • Elementary Functions: relations, functions, standard functions, hyperbolic functions, limits
  • Solving Equations: linear, quadratic, simultaneous, polynomial, inequalities
  • Trigonometrical functions: identities, equations and engineering applications
  • Complex Numbers: concept, arithmetic, De Moivre’s theorem, regions in the complex plane
  • Matrices: matrix algebra, determinants, inverse, transformations, notation
  • Ordinary Differentiation: techniques, maximum and minimum values, higher derivatives, applications
  • Partial Differentiation: functions of two variables, partial differentiation, small increments and differentials
  • Integration: techniques, standard integrals, integration by parts, partial fractions, trigonometric functions, analytical techniques, Simpson's rule, applications (e.g. area, mean value, centroids, RMS, volumes of revolution)
  • Vectors: vector algebra, cartesian coordinates, scalar and vector product
  • Linear Algebra: Gauss elimination, Gauss-Jordan method, iterative method
  • Sequence and Series: infinite, convergent, divergent, Standard, Taylors, Mclaurins and Binomial series, approximate and limiting values
  • Differential equations

Computer Workshops

  • Selected areas of the syllabus will be taught at the computer. These sessions will explore the mathematical technique, rather than use of software, so fully guided examples based on engineering or natural science problems will be provided. Students will begin to identify the commonality of equations describing engineering systems.

Design

  • Use of mathematics in establishing/evaluating solutions.

Module aims:

A good mathematical grounding is essential for all scientists and engineers. The mathematics in this syllabus provides the foundation for deeper analysis and understanding of scientific and engineering subjects, and enhances the student’s ability to make sound judgements regarding the science and technology that they will use in the course of their career.  Wherever possible, mathematical theory is taught by considering a real example, to provide students with the context for the mathematical tools they will use.  Solutions are considered by both analytical and numerical techniques. Where basic principles are involved, some proofs will also be taught.

Module content:

Introduction to Physical chemistry

  • Introduction to reaction kinetics
  • Thermochemistry
  • Chemical equilibria
  • Gibbs energy and entropy

Introduction to Organic Chemistry

  • Organic nomenclature, structure and reactivity
  • Introduction to fundamental reaction mechanisms

Introduction to Inorganic Chemistry

  • Introduction to structure and bonding in inorganic chemistry
  • Structure of simple solids and materials
  • Acids and bases

Introduction to Analytical Chemistry

  • Introduction to concepts in measurement
  • Standardisation and calibration
  • Introduction to qualitative and quantitative analysis, including dealing with experimental uncertainty.

Practical chemistry

  • Experimental techniques and laboratory safety
  • Recording observations and writing reports
  • Understanding experimental uncertainty

Module aims:

The Chemistry Fundamentals module aims to provide a broad introduction of the basics of theoretical and practical chemistry across organic, inorganic, physical and analytical chemistry. The module is evenly split between practical and classroom and will introduce the basics techniques of laboratory chemistry and an introduction to recording experimental data and writing of reports apply the theories introduced in the classroom and the directed reading.

Module content:

Essential Physics for Chemical Engineers

  • Dimensions, units and conversions
  • Introduction to fluid flow in pipes
  • Stream composition

Design and Analysis of Processing Systems

  • Chemical process diagrams
  • Batch and continuous processing
  • Material balances

Introduction to Chemical Reactors

  • General reactor design principles
  • Reactor types
  • Batch, semi-batch and continuous reactors
  • Reactor performance
  • Reactor heating and cooling

Introduction to Physical Processing and Separations

  • Rheology of simple fluids and complex mixtures.
  • Mixing and pumping of fluids, and fluid flow in pipes
  • Main separation processes and their characteristics
  • Physical separation: membranes.

Principles of Safe and Sustainable Processing

  • Introduction to safety and risk assessment.
  • Creating and maintaining a safety culture.
  • Incorporating sustainability in process design.
  • Life cycle assessment

Manufacturing

  • Manufacturing performance indicators and improvement strategies.
  • The four V's
  • Types of production, categories of product
  • Layout of production processes

Module aims:

The aim of this module is to provide an application informed introduction to the key concepts of chemical engineering and also to emphasise the distinction from other engineering disciplines (e.g. mechanical and electrical) that are focussed on discrete parts manufacturing rather than materials processing. This module also introduces students to working and presenting in groups. 

Essential Physics for Chemical Engineers provides the relevant principles of physics underpinning physical materials processing while an Introduction to Chemical Reactors introduces key concepts for equipment design based on Level 3 chemistry concepts. 

Design and Analysis of Processing Systems introduces simple balance equations around processing units and methods for sizing continuous units based on driving force, residence time
etc. The Principles of Safe and Sustainable Processing is illustrated by the study of real processes and historical incidents. These foundations for the continuing themes of safety and design are further developed at each level of learning.   

Finally, to emphasise the interdisciplinary nature of engineering, the topic of Manufacturing is introduced to highlight production at the interface of chemical, mechanical and electrical engineering (e.g. packing).  The appropriateness of established methods of operations analysis to continuous processes involving fluid flow, tanks
etc. is explored.

Module content:

  • Basic definitions; energy, working fluid, continuum, property, systems, surroundings, open and closed systems, phase, state, equilibrium, process, cycle.
  • Zeroth Law of Thermodynamics: temperature scales.
  • Perfect gases, ideal gas equation of state, real gases, compressibility factor, van der Waals equation of state, virial coefficients
  • Work and heat definitions, path functions, types of work, sign conventions, definite integrals
  • First Law of Thermodynamics
  • Internal energy, enthalpy, constant specific heats, specific heat variation with temperature
  • Polytropic processes
  • Properties of pure substances; changes of state, sub cooled, saturation and superheated properties, use of tables, phase diagrams.
  • First law analysis of systems, cyclic processes, closed systems, open systems (steady and unsteady flow), application to engineering equipment, internal combustion engines.

Module aims:

Thermodynamics is a basic science that deals with energy interactions in physical systems. The purpose of this section is to study the relationship between heat (thermos) and work (dynamics). A range of real-world applications are presented to give students a feel for scientific and engineering practice and an intuitive understanding of the subject matter.

Module content:

Heat Transfer

  • Heat conduction and Fourier's Law
  • Convection and correlations for heat transfer coefficients

Fluid Mechanics

  • Basic definitions and properties: laminar, turbulent, transition flow, boundary layer, units
  • Fluids at rest and applications in pressure measurement; pressure distribution over plane and curved surfaces
  • Static, stagnation and dynamic pressure, centre of pressure, pressure measurement
  • Introduction to the study of flowing fluids and the special case of Bernoulli's equation including applications in flow measurement (free jets, confined flows, flow rate measurement), control volume analysis
  • Streamlines, stream tubes and particle paths and the physical interpretation of the Bernoulli equation
  • Introduction to control volume analysis
  • The conservation principles for open systems and illustrate the applications to simple fluid systems and devices

Module aims:

Heat Transfer

An important tool for any engineer is the ability to identify and maintain mass and energy budgets for engineering systems. This module introduces the concept of an engineering system, and students are introduced to the techniques they will require to solve and analyse a process.

Fluid Mechanics

Fluid mechanics is the branch of applied mechanics that is concerned with the statics and dynamics of liquids and gases. The analysis of the behaviour of fluids is based upon the fundamental laws of applied mechanics, which relate to the conservation of mass-energy and the force-momentum equation. However, instead of dealing with the behaviour of individual bodies of known mass, fluid mechanics is concerned with the behaviour of a continuous stream of fluid. 

The aim is to deepen your understanding of the chemical and physical principles required for safe design and operation of process plants.

Module content:

Mathematics and Modelling

  • Statistical methods; distribution, sampling, statistical inference, estimation from a sample, hypothesis testing, significance testing.
  • Matrix Eigen value problems, with application to solutions of Ordinary Differential Equations.
  • Laplace transforms for solution of Ordinary Differential Equations.
  • Fourier series approximation of periodic functions.
  • Solution techniques for partial differential equations including the heat equation.

Numerical Modelling and Computation

  • Construction of algorithms in high-level programming languages including, variables, arrays, operators and expressions, data input and output, flow control and functions.
  • Implementation of numerical methods using MATLAB.
  • Numerical solution of ordinary differential evolution equations using Euler's method and the Runge-Kutta methods.
  • Introduction to Optimization; Optimisation of functions of several variables, with and without constraints.
  • Representation of engineering problems as mathematical optimisation problems and solution using Excel Solver.

Module aims:

The purpose of this programme of mathematical study is to ensure that students are competent in calculations using a range of mathematical tools.  The content will extend the student’s analytical skills by introducing more advanced topics that are required parts of the modern engineers skill set, and enhance their ability and confidence to make sound judgements.

Module content:

Gas absorption

  • Henry’s law and analysis of mass transfer using Whitman Two Film theory.
  • Integration of elemental mass balance equation and introduction of concepts of NTU and HTU.
  • Gas absorption with reaction.
  • Design equations for stripping columns. 

Distillation

  • Vapour-liquid equilibrium, ideal stage concept and material / energy balance equations for binary systems.
  • Use of McCabe-Thiele plots for binary systems.
  • Calculation of boiling and dew point temperatures and design equations for multicomponent mixtures. 

Solvent extraction

  • Triangular diagrams for ternary mixture equilibrium data.
  • Ideal stage concept.
  • Material balances and graphical analysis of counter-current multi-stage processes.
  • Solid-liquid extraction processes. 

Solids separation

  • Applications involving solids separation and associated equipment.
  • Filtration: general principles of mathematical analysis.
  • Batch filtration and continuous rotary filters.
  • Centrifuges, cyclones and hydrocyclones.

Drying

  • Types of industrial dryers.
  • Humidity, mass balances and use of psychrometric charts.
  • Adiabatic dryers and use of drying curves.

Module aims:

Separation processes is perhaps the defining part of the chemical engineering curriculum. This module introduces design methods and practice for a range of key unit operations for physical separation of solid and liquid components. An aim of this module is to build on the concepts of equilibrium and mass transfer driving force developed in level 4 in order to build knowledge and understanding of equilibrium stage operations for downstream refining and purification operations. Another aim of this module is to give students the appropriate methods and equations to analyse and design continuous and batch equipment for chemical and physical separations.

Module content:

 

  • Second Law: treatment of reversible and irreversible processes, corollaries of second law, definitions of entropy and isentropic processes
  • Mass and Energy Transfer:Extension of principles to non-steady-state and reacting systems
  • Combustion: Thermodynamics of reacting systems. Definition of standard states. First law analysis of reacting systems including dissociation. Use of combustion tables, solution of various types of combustion problems
  • Cycles: Different types of engineering cycles. Methods of improving cycle efficiency
  • Energy Use: Theoretical limits on energy efficiency. Sources and sinks and implications for environment. Opportunities for and implications of energy efficiency.
  • Chemical thermodynamics - equations of state and phase equilibria for pure fluids, phase equilibria in fluid mixtures, reaction equilibria

Module aims:

Thermodynamics is the science that deals with energy interactions in physical systems.  The purpose of this module is to extend the basic principles heat, work and energy then apply this knowledge to real engineering problems, and also to introduce chemical thermodynamics - the interaction of heat and work with changes of state and chemical reaction.

Module content:

  • Design and analysis of heat transfer devices using conduction, convection and radiation
  • Design principles for engineering flow systems
  • Mathematical analysis of boundary layers
  • Fluid flow in different conditions, e.g. Compressible flow, open channel flow, pipe networks
  • Turbomachinery: propellers, pumps and turbines
  • Introduction to Computational Fluid Dynamics

Module aims:

The understanding of fluid mechanics is fundamental to much of chemical and mechanical engineering, and this module seeks to develop extend relevant knowledge of fluid mechanics to the point that real world problems can be addressed. Almost every branch of science and engineering includes some kind of heat transfer problem, and there is a need for engineers to have some background in this area. This module aims to provide an introduction to the basic principles and practical applications of conduction, convection and radiation heat transfer.

Module content:

Introduction to Chemical Analysis 

  • Instrumental vs. classical techniques.
  • Detection limits, sensitivity, dynamic range, precision and accuracy.
  • Statistical analysis
  • Elemental Analysis: Atomic absorption spectroscopy. X-ray fluorescence spectroscopy. Inductively coupled plasma techniques.

Molecular Spectroscopy

  • UV & visible spectroscopy.
  • Mass spectrometry.

Separations and Chromatography

  • Gas & liquid Chromatography.
  • Hyphenated techniques: GC-MS, LC-MS, GC-GC.

Module aims:

Introduction to Chemical Analysis

Students will be introduced to the concept of chemical analysis as a structured approach involving element identification, chemical structure determination, and (in the case of solids) spatial location. The dominance of instrumental techniques in the modern analytical laboratory is emphasised, and illustrated by the varying approaches to elemental analysis depending upon the sensitivity and detection limits required.

Molecular Spectroscopy

The content of this section of the course forms a basic introduction to the three major techniques of molecular spectroscopy.In all three cases, the content covers the underlying scientific principles, and introduction to the instrumentation used, and guidance on interpretation of the resulting spectra.

Separations and Chromatography

Separation of complex mixtures into their constituent components is a vital pre-requisite in chemical analysis.Students will be introduced to the principles of liquid and gas chromatography techniques, and the use of these methods in conjunction with molecular spectroscopy (so-called hyphenated techniques) is touched upon.

Module content:

Control

  1. Introduction
  2. Modelling systems
  3. Differential equations
  4. Linearisation
  5. Introduction to modelling and simulation for control systems design
  6. Laplace transforms
  7. Characteristics of Laplace transforms
  8. Open loop & closed loop
  9. Main parts of feedback control systems
  10. Effects of feedback
  11. Feedback characteristics
  12. 1st order system response and characteristics
  13. PID Characteristics
  14. PID controller structures
  15. PID tuning for 1st and 2nd order systems with ZN and RH criterion
  16. Brief Introduction to practical control implementation
  17. Introduction to ITEA performance criterion

Simulation

Computer workshops will be provided for hands-on experience in designing control systems using the
MATLAB/SIMULINK software package. Essential features of the control syllabus will be demonstrated through a
collection of example problems.

Laboratories

Students will undertake engineering control laboratory practical with the application of temperature control of a heating, ventilation and air conditioning (HVAC) system.


Module aims:

The aim is to provide a sound underpinning of engineering control theory to serve as a foundation for the third year module
(Process Systems Engineering), where the focus will be on the specific application of control in process industries. Students will be introduced to control in relation to engineering systems, and in particular to develop methods of modelling the control of systems and processes. Techniques are explored with particular reference to common practical engineering problems and their solutions. 

Module content:

Flowsheet Analysis and Process Integration

  • Concept of Unit Operations as components making up process flowsheets.
  • Process flow diagram and P&I diagrams.
  • Measured and manipulated process variables.
  • Principles of mass balances for complex flowsheets with recycles.
  • Energy balances, hot and cold utilities and concept of heat integration.
  • Pinch analysis for determination of minimum energy targets.
  • Design of heat exchanger networks.
  • Conceptual extension of process integration to mass transfer networks. 

Process Simulation

  • Simulation principles.
  • Use of PRO/II for solving engineering problems and analysing the results.
  • Thermodynamic methods: available models, selection criteria.
  • Building a flowsheet and Managing Process Flow Diagram
    (PFD) files.
  • Simulation of various processes.

Dimensional Analysis and Scale-up

  • Examples of physical systems amenable to dimensional analysis: e.g. falling sphere, mass/heat transfer.
  • Outline of Buckingham’s Pi Theorem.
  • Use of engineering correlations for scale-up.
  • Maximising inherent safety for scale-up.  

Module aims:

Flowsheet Analysis and Process Integration The process flowsheet is a key tool for analysis and communication for both practising engineers and industrial scientists. By the end of this module, students will be able to understand complex flowsheets and solve plant-wide mass balances building on concepts of single unit mass and energy balances introduced in level 4. The pinch analysis method for heat integration is introduced, laying the foundation for a more general treatment of process optimisation which is an option in level 7.

Process Simulation Process simulation is a highly sought after skill in today’s chemical engineering graduates. This module introduces PRO/II Simulation, which is a professional simulation tool that offers a comprehensive simulation solution for process design and operational analysis. By the end of the module students should be able to understand the circumstances which make the use of software design tools appropriate and necessary, and choose the appropriate tool for a given task. Also to effectively carry out process simulation of various processes, solve engineering problems and analyse the results.

Dimensional Analysis and Scale-up The aim of this teaching is to introduce students to the novel concept of the dimensionless variable as a useful scale-free system property. This will put into context the limited exposure to dimensionless numbers (e.g. Reynolds number) given in level 4. The focus will be on the practical value of engineering correlations for designing process equipment which will be further extended in level 6 as are rules for safe design and operation. 

Module content:

Pre-placement:

  • Structured approaches to researching, selecting and securing a suitable work placement relevant to the student’s interests and career aspirations*.
  • Writing an effective CV. Constructing a letter of application.*
  • Interview skills.*

 *Note: Students are required to undertake these pre-placement tasks during term 1 level 5, as part of the placement acquisition process and will be supported by the Work Based Learning team and the Careers and Employability department.

 Induction Programme and Placement:

  • The organisational context: research-informed analysis of the placement organisation’s aims, structure, culture.
  • Self- assessment of needs: identification of the range of transferable skills, competencies and attitudes employees need and employers expect graduates to possess. (Employability Skills: e.g. verbal and written communication, analytical / problem solving capabilities; self-management; team working behaviours; negotiation skills; influencing people; positive attitude, resilience, building rapport).
  • Devising a strategy for integrating into the workplace and work based teams
  • Completion of online assignment tasks covering sourcing and obtaining placement; health and safety procedures in general; general workplace integrity; placement requirements. 

During and post-placement: Learning effectively in and from the workplace:- 

  • Devising and implementing strategies to improve own approach and performance
  • Critical analysis/evaluation of approach to skill development and performance in the workplace;
  • Influencing the Placement Provider’s appraisal;
  • Devising an action plan to develop gaps in transferable skills based on the placement experiences;

Module aims:

This module aims to enhance students’ prospects of gaining graduate level employment through engagement with a University approved work placement**, which will enable them to:

  • Develop their understanding of workplace practice and lifelong learning;
  • Enhance their work readiness and employability prospects through development of transferable skills;
  • Take responsibility for their own learning and acquisition of workplace employability skills;
  • Articulate, in writing, their employability skills.

You will gain a broader knowledge for technical/strategic decision making.

Module content:

Atmospheric Environmental Science and Protection

  • The natural and manmade processes controlling the composition of the atmosphere.
  • Protection, mitigation and control of air quality in a modern industrial economy.
  • The collection, analysis and interpretation of environmental data.
  • The communication of topical issues of environmental quality to different audiences.

Process Safety and Loss Prevention

  • Legislation and the responsibility of the Engineer.
  • Hazards: Physical, Chemical, Fire.
  • Fire Protection.
  • Chemical Reaction Hazards.
  • Hazard identification.
  • Hazard and Operability Studies (Hazop).
  • Risk assessment and fault trees.
  • Case studies: the causes of incidents.
  • Human factors and task analysis.

Module aims:

The aim of this module is to instil in students the regulatory requirements and technical considerations for safely and sustainably designing, operating and decommissioning industrial chemical processes. 

The Atmospheric Environmental Science and Protection part of this module looks at natural and industrial contamination in the atmosphere and how it can be analysed and controlled. It also considers the science of important topical issues.

Process Safety aims to prepare graduates for safe professional practice by emphasising the responsibilities of management for safety in scientific and engineering activities and how these can be met technically. Chemical and engineering principles from earlier levels of study are used to understand potential chemical and physical hazards. Finally, real examples of major incidents that have led to new regulation are studied.

Module content:

Chemical Reaction Engineering

  • Advantages and industrial uses of different reactor operating modes: batch, semi-batch, continuous, semi-continuous.
  • Quantitative description of Batch, PFR and CSTR as ideal reactors and associated mass and energy balances.
  • Concepts of conversion, yield and selectivity.
  • Concept of Residence Time Distribution (RTD); C(t), E(t), F(t) curves; and calculation of conversion from RTD.
  • Real (non-ideal) reactors with industrial examples and calculation of reactor size based on reaction rate.
  • Analysis and optimization of multiple reactor configurations: tanks in series, plug flow with recycle
    etc.
  • Isothermal and adiabatic reactors.
  • Dispersion model for non-Ideal flow in a tubular reactor. 

Catalysis

  • General principles of catalysis in terms of reaction energetics.
  • Organometallic chemistry and transition metal complexes for homogeneous catalysis exemplified by the Cativa process and Wilkinson’s catalyst.
  • Enzyme catalysis mechanisms and examples.
  • Derivation of Michaelis-Menten equation for enzyme kinetics.
  • Adsorption: mathematical description of physisorption and chemisorption.
  • Mechanisms for surface reactions in heterogeneous catalysis (e.g. Langmuir-Hinshelwood, Eley-Rideal). 

Solid-Fluid Diffusion and Reaction

  • Concept of diffusion controlled reactions.
  • Definition and use of effectiveness factor and Thiele modulus.
  • Diffusion and reaction in flat slab and spherical pellet.
  • Fluid particle reaction kinetics: progressive-conversion and shrinking particle models.

Module aims:

The overall aim of this module is to extend previous chemical knowledge into industrial applications and provide the basis for further self-directed learning to meet the needs for subsequent graduate work. 

Chemical Reaction Engineering
The part of the module aims to strengthen and expand the fundamental knowledge of mass and energy balances, reaction kinetics and thermodynamics; and apply this to the design and analysis of chemical reactor systems. This requires the introduction the important new concepts of ideal reactors and residence time distribution. 

The teaching of Catalysis extends the molecular understanding of chemical and biological reaction kinetics from level 4. It also gives a practical application of transition metal chemistry discussed in level 5. The industrially important area of heterogeneous catalysis is introduced as a prelude to the final part of the module. 

Solid-Fluid Diffusion and Reaction builds on and extends the concept of diffusion controlled chemistry introduced during level 4 by a consideration of reactions in which interaction between a fluid and a solid phase is the controlling factor.

Module content:

Conceptual Process Design

  • Stages in process design
  • Project structure, organization and documentation
  • Product design

Design of Process Equipment

  • Materials selection
  • Short-cut methods for preliminary design of distillation columns
  • Design of separation column internals: packing and trays for distillation and absorption
  • Mechanical design of pressure vessels and storage tanks
  • Single and multi-stage pumps and compressors
  • Design of particle handling and storage equipment
  • Design of stirred tanks with heat transfer
  • Design of two-phase heat exchangers including reboilers and condensers

Process Economics

  • Capital and operating cost estimation for equipment and processes
  • Project economic evaluation

Module aims:

The purpose of this module is to deliver core chemical engineering topics not previously covered and with particular relevance to the third year design project. Conceptual Process Design teaches the structure and organization of the design process in the chemical industries. Design of Process Equipment covers the design of various key unit operations including columns and absorbers, reboilers and condensers, as well as ancillary equipment such as compressors, pressure vessels
etc. Guidance on materials selection is also provided.  Process Economics provides tools and techniques for the estimation of process/project cost and overall economic performance.

Module content:

Sustainability in Process Design

  • The concept of sustainability. Environmental, economic and social criteria. The life cycle approach.
  • Process design for sustainability.
  • Specific industrial process examples.

Energy from Biomass

  • Biomass types and characteristics
  • Direct use
    • Combustion based processes
    • Vegetable oils
  • Thermal conversion
    • Gasification based processes
    • Pyrolysis based processes
  • Biological conversion
    • Fermentation-based processes
    • Anaerobic digestion based processes
  • Chemical conversion
    • Transesterification to biodiesel

Other Renewables and Associated Low Carbon Technologies

  • Solar energy systems
    • Solar thermal
    • PV
  • Wind energy systems
  • Water energy systems
    • Hydroelectric
    • Wave
    • Tidal
  • Geothermal power generation
  • Electrochemical energy conversion and storage
    • Fuel Cells
    • Batteries
  • Other energy storage options
  • The Smart Grid

Module aims:

The aim of this module to instil in students the regulatory requirements and technical considerations for designing, operating and decommissioning sustainable industrial chemical processes, and in particular sustainable energy generation systems.

The benefits of embedding Sustainability in Process Design in order to minimise the consumption of scarce material and energy resources is illustrated through the consideration of specific industrial process examples.

Thermal conversion and microbial degradation processes to derive Energy from Biomass is also presented in this module, reinforcing the application of biochemical fundamentals gained at earlier levels. A detailed overview is given of the current and future technologies for deriving power, heat and transportation fuels from biological sources.

Other Renewables and Low Carbon Technologies aims to give an insight into the other main sustainable power technologies. The teaching will draw on physical and engineering principles learned earlier, and will enable participants to critically assess the relative merits and applicabilities of these technologies.

Module content:

The design project undertaken in the third year of study is a major piece of coursework that integrates key knowledge and skills acquired elsewhere in the degree programme. It is a challenging exercise that is constructed to be as close as possible to a professional engineering design exercise.

Students must work well in teams, make difficult judgements and display considerable creativity.

The project has two phases, a group phase in which students work in small groups to produce a preliminary design of a specified process, followed by an individual phase in which students focus on particular aspects of the process in more detail.

Phase 1: Group work

Review literature for the product and associated process routes, including background chemistry and technology, markets, environmental constraints, properties of significant materials handled
etc.

Select the process route to be designed.

Generate a process flow diagram
(PFD) indicating all the major unit operations, with an associated process description.

Prepare a conceptual mass balance for the process at the chosen scale of production, incorporating preliminary energy balance calculations where required.

Describe plant operation and control including steady-state, start-up and shut-down.

Review the design to identify significant safety, health and environment (SHE) and sustainability issues.

Phase 2: Individual work

Each student completes a detailed chemical engineering design for a specified major plant item, which at Level 6 will be a standard unit operation.

For the major plant item:

Prepare a PFD for the zone local to the major plant item, and review and if necessary develop the local mass/energy balance.

Carry out a process design of the major plant item and prepare data sheets.

Develop an operating and control strategy and a P&ID for the zone local to the major plant item, recognising that the zone is part of the overall plant.

For the complete process:

Complete a HAZOP study (in collaboration with other group members) for a selected node in the process.

Carry out an economic appraisal of the proposed design, including estimates of capital and operating costs and income streams, and a discounted cash flow (DCF) analysis to assess profitability.


Module aims:

The design project provides students with a learning experience that will enable them to carry out both group and independent design practice and to integrate many of the subjects they have studied throughout their degree.  Students are expected to plan, research and execute their task while developing skills in critical judgement, independent work and engineering competence.  Students will also gain experience in presenting and reporting a major piece of engineering work.

Module content:

Commercial and Economic Operations: 

  • Organisation of a company: Types of companies, elements of company law, sources of financing.
  • Financial environment: Illustrative topics: microeconomics, macroeconomics, inflation, GDP, market structure, monopolies, fiscal policy
  • Financial Accounting: Illustrative topics: Source of Finance, Income Statement, Profit and Loss, Balance Sheet, Cash Flow, Ratio Analysis.
  • Management Accounting: Illustrative topics: Elements of cost, marginal and standard costs, break-even analysis, overhead absorption, ABC costing, budgets.
  • Economics management in operation: Cost classifications, contribution margin and breakeven analysis,
  • Project analysis: time value of money, ROI, payback, NPV, IRR, Risk and uncertainty
  • Strategic initiatives: Illustrative topics: Target costing, balanced scorecards, throughput accounting, the international dimension of business operations
  • Industrial legislation: Illustrative topics: Health and Safety at Work Act, COSHH, risk assessment, elements of contract law, sale of goods, employment and IPR, Tort of Negligence (product safety and liability, professional negligence, neighbour principle)

Professional Ethics 

  • Professional conduct: the Institutions, chartered status, continuing professional development, discrimination, ethical responsibilities, technology and employment – the changing face of society and the engineer and scientists role 
  • Embedding sustainable practices within business processes
  • Environmental impact of business processes
  • Business operation and social responsibility 

Module aims:

The aim of this module is to equip students with an awareness of the wider commercial and economic context of engineering operations.  Students will gain an understanding of strategic, operational, environmental and ethical issues as they impact and guide the business practice of professional engineers and scientists. Students will apply knowledge and analysis to specific issues and dilemmas affecting individuals and organisations is science and engineering businesses.

Module content:

PROCESS CONTROL

  • Classical control reviewed in a Chemical Engineering context
  • Process control equipment (instrumentation and valves)
  • Control systems on P&I diagrams
  • Control strategies in process plant
  • The control of common plant items
  • Plant start-up and shut-down
  • Operator features of control systems architecture
  • An introduction to Model Predictive Control

MATHEMATICAL MODELLING

  • Process simulation - development of equations and solution techniques (thermodynamic property methods)
  • Process simulation - dynamic models for advanced predictive control
  • Optimisation for design and operation in the process industries

Module aims:

PROCESS CONTROL

Building on the general control theory provided in SE5044, this module focuses on the specific application of control in the process industries. The student will become familiar with the interpretation of P&I diagrams, the common types of instrumentation, the use of valves, the main conventional control strategies and their application to specific process plant items, the operator features of DCS, SCADA and PLC systems, and the basics of Model Predictive Control.

MATHEMATICAL MODELLING

This will develop practical simulation addressed at Level 5 by showing how mathematical relationships for chemical thermodynamics can be formulated and solved. Dynamic modelling as the foundation for advanced predictive control will be covered. Students will also learn how optimisation can be used for efficient design and operation of chemical plants.

Who you'll Learn from

Dr Yousef Faraj

Deputy Head of Natural Sciences; Senior Lecturer in Chemical Engineering
Dr Yousef Faraj

Dr Maria Sotenko

Senior Lecturer in Chemical Engineering
Maria Sotenko

Dr David Ward

Programme Leader for Chemical Engineering BEng (Hons)
profile picture of david ward

Dr Andrew Fogg

Senior Lecturer
Andrew Fogg

Dr Graham Spink

Senior Lecturer
Graham Spink

How you'll Learn

Beyond the Classroom

On this course, you have the opportunity to spend five weeks working for a host organisation via our innovative Work Based Learning module. You’ll have the chance to test-drive a future career, boost your CV and gain real work experience. 

All Chemical Engineering students undertake a work placement at the end of Year 2. Most placements are with engineering firms nearby, or in research groups within the University, although some students have completed international placements in places such as Qatar, USA and Norway. Additionally, many students complete a placement at the end of Year 1, and some students spend a year working in industry before the final year of their degree. 

Entry Requirements

112 UCAS Points

UCAS Tariff

112 points

GCE A Level

Typical offer – BBC including grade B in Maths and grade B in Chemistry

BTEC

BTEC Extended Diploma (Engineering) will be considered alongside A Level Chemistry grade B.

International Baccalaureate

26 points, including 5 in HL Maths and Chemistry

Irish / Scottish Highers

Irish Highers: H3 H3 H3 H3 H4, including H3 in Maths and Chemistry

Scottish Highers: BBBB including Maths and Chemistry

Access requirements

Access to HE Diploma (Science and Engineering), to include 45 credits at level 3, of which 30 must be at Merit or above in Maths and Chemistry

T Level

T Level will be considered alongside A Levels Maths and Chemistry

OCR Cambridge Technicals

OCR Extended Diploma will be considered alongside A Levels Maths and Chemistry

Extra Information

Welsh Baccalaureate Advanced and A level General Studies will be recognised in our offer.  We will also consider a combination of A Levels and BTECs/OCRs.

Students from countries outside the UK are expected to have entry qualifications roughly equivalent to UK A Level for undergraduate study and British Bachelor's degree (or equivalent) for postgraduate study. To help you to interpret these equivalents, please click on your country of residence to see the corresponding entry qualifications, along with information about your local representatives, events, information and contacts.

We accept a wide range of qualifications and consider all applications individually on merit. We may also consider appropriate work experience.

For more information on our entry requirements, please visit International Entry Requirements

72 UCAS Points

UCAS Tariff

72 points

GCE A level

72 points overall, including grade D in A level Maths and Chemistry

BTEC

BTEC Extended Diploma (Engineering) will be considered alongside A Level Chemistry. BTEC Extended Diploma (Applied Science) will be considered alongside A Level Maths.

International Baccalaureate

24 points, including 4 in HL Maths and Chemistry

Irish / Scottish Highers

Irish Highers: H4 H4 H4 H4 H4, including Maths and Chemistry

Scottish Highers: CCDD including Maths and Chemistry

Access requirements

Access to HE Diploma (Science and Engineering) – Pass overall

T Level

T Level will be considered alongside A Level Maths and Chemistry

OCR Cambridge Technicals

OCR Extended Diploma will be considered alongside A Level Maths and Chemistry

Extra Information

Welsh Baccalaureate Advanced and A level General Studies will be recognised in our offer.  We will also consider a combination of A Levels and BTECs/OCRs. If you are a mature student (21 or over) and have been out of education for a while or do not have experience or qualifications at Level 3 (equivalent to A Levels), then our Foundation Year courses will help you to develop the skills and knowledge you will need to succeed in your chosen degree. 

Where you'll study Exton Park, Chester

Fees and Funding

£9,250 per year (2024/25)

Our full-time undergraduate tuition fees for Home students entering University in 2024/25 are £9,250 a year, or £1,540 per 20-credit module for part-time study.

The University may increase these fees at the start of each subsequent year of your course in line with inflation at that time, as measured by the Retail Price Index. These fee levels and increases are subject to any necessary government, and other regulatory, approvals.

Students from the UK, Isle of Man, Guernsey, Jersey and the Republic of Ireland are treated as Home students for tuition fee purposes.

Following the UK’s exit from the EU, students from countries in the European Economic Area and the EU starting in or after the 2021/22 academic year will pay International Tuition Fees.

Students who have been granted Settled Status may be eligible for Home Fee Status and if eligible will be able to apply for Tuition Fee Loans and Maintenance Loans.

Students who have been granted Pre-settled Status may be eligible for Home Fee Status and if eligible will be able to apply for Tuition Fee Loans.

£13,950 per year (2024/25)

The tuition fees for international students studying Undergraduate programmes in 2024/25 are £13,950. 

This fee is set for each year of study. All undergraduate students are eligible for international and merit-based scholarships which are applicable to each year of study.  

For more information, go to our International Fees, Scholarship and Finance section.

Irish Nationals living in the UK or ROI are treated as Home students for Tuition Fee Purposes. 

Your course will involve additional costs not covered by your tuition fees. This may include books, printing, photocopying, educational stationery and related materials, specialist clothing, travel to placements, optional field trips and software. Compulsory field trips are covered by your tuition fees. 

If you are living away from home during your time at university, you will need to cover costs such as accommodation, food, travel and bills. 

Personal protective equipment such as lab coats, safety glasses, hard hats, steel toecap boots and ear defenders will also be provided as required at no additional cost.

Your Future Career

Job Prospects

Chemical engineering graduates are in high demand in sectors such as oil and gas, food, pharmaceuticals, energy, water and waste managementThe technical and business expertise developed on the BEng and MEng degrees in Chemical Engineering provides excellent preparation for a wide range of rewarding roles in these, and other, industries. 

Progression options

  • Programme and Project Management MSc

Careers service

The University has an award-winning Careers and Employability service which provides a variety of employability-enhancing experiences; through the curriculum, through employer contact, tailored group sessions, individual information, advice and guidance.

Careers and Employability aims to deliver a service which is inclusive, impartial, welcoming, informed and tailored to your personal goals and aspirations, to enable you to develop as an individual and contribute to the business and community in which you will live and work.

We are here to help you plan your future, make the most of your time at University and to enhance your employability. We provide access to part-time jobs, extra-curricular employability-enhancing workshops and offer practical one-to-one help with career planning, including help with CVs, applications and mock interviews. We also deliver group sessions on career planning within each course and we have a wide range of extensive information covering graduate jobs and postgraduate study.